|
|
|
|
Traxxas Driveshaft, Center, 6061-T6 aluminum (red-anodized)
Sold out
Traxxas 6755R
Driveshaft: Center, 6061-T6 aluminum (red-anodized).
Traxxas Steering Bellcranks, Drag Link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings.
Sold out
Traxxas 3743X
Steering Bellcranks, Drag Link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled).
Enhance steering precision, strength, and looks with Genuine Traxxas machined aluminum steering bellcrank assemblies. Engineered exclusively for Rustler, Bandit, and the Slash, the ball bearing equipped bellcranks offer silky smooth operation for reduced friction and long life. The pre-assembled units are easy to install, include detailed installation instructions, and are available in fire-red or a brilliant-blue anodized finish with laser-etched Traxxas logo.
Accessory part for these models:
Rustler®
Bandit VXL
Bandit
Ford F-150 Raptor
Nitro Slash
Rustler® VXL
Slash 2WD Unassembled Kit
Slash VXL
Slash
Traxxas Caster Blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right).
Traxxas 3632X
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/suspension screw pin (2)
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the red, blue or green anodized caster blocks feature a high-contrast laser etched TRX logo. Simple bolt-on installation that anyone can perform inspires confidence for future upgrades.
Traxxas Steering Blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)
Traxxas 3636X
Steering Blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/5x11mm ball bearings (4)
Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.
Traxxas Stub Axle Carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)
Traxxas 3652X
Stub Axle Carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/5x11mm ball bearings (4)
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.
Traxxas Turnbuckles, Aluminum (red-anodized), toe links, 59mm (2)
Sold out
Traxxas 3139X
Turnbuckles, Aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477).
ACCESSORY ALUMINUM TURNBUCKLES: Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in a fire-red or brilliant blue-anodized finish for stunning good looks. The camber kit includes a matching 5mm aluminum wrench that prevents marring the finish. Traxxas aluminum toe links are lighter than the stock steel turnbuckles, and are 35% lighter than titanium. The aluminum camber links are much stronger than the stock, non-adjustable links. High-grade 7075-T6 aluminum ensures increased bending stiffness. All camber/tie rod sets and single replacements come assembled with rod ends & hollow balls.
Traxxas Toe Links, front (TUBES orange-anodized, 7075-T6 aluminum).
Traxxas 8948A
Toe Links, front (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (88mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/aluminum wrench (1).
Accessory part for these models:
Maxx®
Traxxas 17mm Splined Aluminum Wheel Hub Adapters
Traxxas 5853X
Splined, 17mm, Wheel Hubs
Short (2), Long (2)/Wheel Nuts, Splined, 17mm
(4) (Blue-Anodized)/Hub Retainer M4x0.7 (4)/Axle Pin (4)/Wrench, 5mm
Traxxas' 17mm Hex Adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle. Installation is simple using the included 5mm hex wrench. The adapters' unique splined design offers maximum strength when used with Traxxas wheels, and also fits any standard 17mm hex wheel. Rugged machined-aluminum construction and vivid blue anodizing combine custom looks with maximum performance. The adapters are offered in complete sets to fully outfit one vehicle.
Accessory part for these models:
Bigfoot® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford F-150 Raptor
Nitro Slash
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash VXL
Slash
Stampede® VXL
Stampede®
Traxxas Big Bore Shocks
Sold out
Traxxas 5862
Big Bore Shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4)
For the ultimate in bump and jump control, Traxxas Big Bore shocks are the perfect addition to your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores, and titanium nitride coated shafts offer incredible durability and near frictionless operation for ultra smooth damping and long-lasting performance. Progressive rate springs for 2WD Slash are included; for best performance with Rustler, Bandit, Stampede, Craniac and Skully install the springs included with your model.
Accessory part for these models:
Rustler® 4X4 VXL
Slash 4X4 Platinum
Slash 4X4 Ultimate
Bandit VXL
Bandit
Bigfoot® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Ford F-150 Raptor
Ford Fiesta® ST Rally
Nitro Rustler
Nitro Slash
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 2WD Unassembled Kit
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
Traxxas Steel Constant Velocity Shafts
Sold out
Traxxas 6852R
Driveshafts, Rear, Steel-Spline, Constant-Velocity (complete assembly) (2)
Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.
Accessory part for these models:
Ford F-150 Raptor
Nitro Rustler
Rustler® 4X4 VXL
Rustler® 4X4
Slash 2WD Unassembled Kit
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Slash VXL
Slash
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Nitro Slash
Rustler® 4X4 VXL
Rustler® 4X4
Traxxas Front Camber Links, (Red-Anodized Tubes, 7075-T6 Aluminum)
Sold out
Traxxas 3643R
Front Camber Links, (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ Rod Ends (4)/ Aluminum Wrench (1)
Accessory part for these models:
Bigfoot® No. 1 Officially Licensed Replica
Bigfoot® Officially Licensed Replica
Rustler® 4X4 VXL
Rustler® 4X4
Rustler® VXL
Rustler®
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 Unassembled Kit
Stampede® 4X4 VXL
Stampede® 4X4
Stampede® VXL
Stampede®
XO-1®
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Stampede® 4X4 VXL