Carrera Straight Track (1:24 Scale) 2 Pieces
Type No.: 20020601
Straight Track: 2 Pieces, 13.58" Long. (1:24)
Carrera Curve Track (1:24 Scale) 3 Pieces, 60 Degrees Each
Type No.: 20020571
Curve Track: 3 Pieces, 60 Degrees Each. (1:24)
Carrera Curve Track (1:24 Scale) 6 Pieces, 30 Degrees Each
Type No.: 20020577
Curve Track: 6 Pieces, 30 Degrees Each. (1:24)
Carrera Outside Shoulder For Curve (1:24 Scale) 3 Pieces
Type No.: 20020561
Curve Outside Shoulder: 3 Pieces, For one 60 degree curve plus two end pieces. (1:24)
Carrera Control Unit
Type No.: 20030352
Be closer to reality with the new Carrera DIGITAL 124/132 products! Tactical races will be a further challenge to meet. The Control Unit, which acts as the new core, allows programming of braking performance, tank capacity and speed (performance)! (1:24 Scale)
Possibility to program:
- Braking performance
- Power (maximum speed)
- Tank capacity
– Pit stop functions
– Pace Car functions Contents: Control Unit incl. 2 end pieces
Carrera Hairpin Curve
Type No.: 20020613
(2) 3/4 standard straights, 2 shoulders for standard straights, 3 bend sections for the hairpin, 3 outside shoulders for the 1/60° curve, 3 inside shoulders for the 1/60° with tire piles, 4 end pieces. (1:24 Scale)
Carrera Lap Counter
Type No.: 20030355
Only in combination with Control Unit 30352!
NEW! Direct link-up to the Control Unit (no additional track required) .
NEW! Stopwatch - also in the pit lane (only with Pit Lane 30356) .
NEW! Car position information on the display .
NEW! Backlite display for improved legibility.
Position listing, fastest lap, total race time, time gap to the leader. Stopwatch times for 6 cars - accurate to 1/1000 sec. Training and racing modes Racing modes divided into lap and time based racing. Lap limit races from 0 to 9999 laps. Time runs from 00:00’01’’ to 99:59’59’’ hours
Carrera Pit Stop Adapter Unit
Type No.: 20030361
Pit Stop Adapter Unit (30361) 34,5 cm/13.58 in. Only in combination with Control Unit 30352 to retrofit the Pit stop Lane 30346 for operating the Driver Display 30353
Adapter Unit (30360) 34,5 cm/13.58 in. Connecting section for Driver Display 30353, startlight 30354 and Position Tower 30357
Carrera Crossing Passage
Type No.: 20020587
Contents: 4 pieces x 34,5 cm / 13.58 in.
Carrera Outside Shoulders
Type No.: 20020561
Outer edge strips for curve 1/60 °
DIGITAL 124, DIGITAL 132, EVOLUTION
Edge pieces for the racetrack
Package content: 3 pieces
For breathtaking drifts
Drifting needs to be learned. But all skill unfortunately does not help if you slip out of the curve while drifting due to a narrow track. To prevent this from happening in the future, you can now expand your racetrack sensibly. This set contains three outer edge strips for the 1/60 ° curves. In addition, two end pieces are included, which can be attached to the start and end straight lines of the curve and optically ensure an attractive end to the curbs. In 1:24 scale, the edge pieces on racetracks can be installed on the same scale: Carrera DIGITAL 124, Carrera DIGITAL 132 and Carrera EVOLUTION. From now on, you no longer have to hold back on the drifts in the curve. Do your best and one thing above all: full throttle!